Edward's Enterprises team performs many wood fencing installations & Oak Park gate repairs such as:
-
Redwood fencing installed
-
Cedar fence installations
-
Wood gate repairs
-
Gate latch replacements
-
Pressure treated posts replaced
-
Leaning fences repaired
-
Dog ear fence panels installed
-
Steel fence posts installed
-
Flat top fencing repaired
-
Painting wood fences & gates
-
Staining wood fences & gates
-
Painting wrought iron fences
-
Steel gates painted
-
Redwood lattice installed
-
Vinyl privacy lattice replaced
-
Double wood gates installed
-
Sagging fence gates adjusted
From small repairs like a leaning section to larger projects like installing 10 new redwood pre-fab panels on treated 4X4 posts, having an established general contractor handle your fence repair & gate installations is important .Simple upkeep can be the most cost effective way to maintain the value of your property's fences.
Wondering if we can assist you with your fence or gate replacement? Call our team to explain your gate or wood fence installation project!
- Handy Tips
- Did You Know?
- Other Work
- DIY FAQs
Don't find out the hard way why maintenance on fences is key! A few hours 2-3 times a year could be the difference between wood fencing that last for 20-30 years or a fence that needs to be replaced too soon.
Every 3-6 months you should check your fence for peeling, splintering, mold or breakage, especially at the base of posts & pickets, & the tops of stringers where water can pool or collect. If you have a vinyl fence summers can dry out & create brittle components like caps that need to be inspected.
Also look for signs of termite damage & infestation. If you find signs of termites, then you may want to consider spot treatment by an exterminator, especially if the fence is attached to your home, as you may have a larger undiscovered issue.
Next, depending on the style of wood & fence, you may want to sand off rough edges or protruding splits, these can provide an entry point for wood destroying insects or dry rot fungus.
The next few procedures may take a bit longer; however, they only need to be preformed every year or two. Painted fences may start to look old when they start peeling & become flaky & chipped, & the loss of the paint's protection will lead to weathering & insect entry more readily. Scraping, painting & sealing can lengthen the life of your fence. First, scrape away flakes & chips before painting. Then use a primer & an outdoors paint to paint the fence. Afterwards, or instead of painting if you prefer a natural look, you may want to seal the fence with a clear or transparent product to help preserve it.
What's better for my backyard fence, Cedar or Redwood?
Sometimes the answer to this question depends on how much stock of either the company you are purchasing has on hand. But what, if any, is the real difference between the two when discussing fencing in particular? For this discussion we are focusing on the pickets themselves, as opposed to the post or stringer as we typically install metal posts with treated 2X3 stringers or treated 4X4 posts with treated 2X4 stringers.
– Cedar has (common) Redwood beat top & bottom in the price category, but not by much depending on where you live or where you are buying.
– Cedar is a light yellow wood while Redwood typically has an earthier brown/red tone, & each will definitely give you a certain look if you are planning on leaving it raw.
– If you are painting or staining the wood fence after installation Cedar may be the better choice over Redwood because of the price difference.
– As for strength & durability, if we use the Janka hardness test Redwood is the clear winner, but unless you are using your fence to catch errant foul balls Cedar (for pickets) should be more than satisfactory. The choice isn't open & closed
– While most fencing contractors will recommend redwood to prevent termite damage, Cedar & Redwood contain tannin, which is a natural insect repellent, but Redwood contains more & may outlast Cedar in a head to head race to rot.
As you can see the differences between the 2 types of picket are not so large & the choice will often come down to general appearance goals & price!
What causes a fence to lean?
Factors such as rotten posts, improperly set posts, extreme weather, & aging wood will cause your fence to lean. If you notice such a case, then you should consider repairing the fence by installing new posts or replacing the whole fence.
FAQ Source
Should a fence wobble?
Your fence should be firm but not too tight, for it can be vulnerable to breakage if you push it too hard or bend it. All fences wobble, although the condition should be that someone can climb at least midway through the posts
FAQ Source
We charge for all time included in a customer's project like replacing the lag screws attaching a post to a home's wall, including purchasing or delivering materials, & offsite work like painting lumber prior to an installation, or for the time to haul away debris. This allows us to take on smaller projects for our fence & gate clients, rather than only lump sum projects with much higher minimums to show up.
Communication: We communicate appointment scheduling, invoicing, estimates & more by phone & email to keep our fence customers “in the loop”.
Most projects get a 3 hour window of arrival, so expect something like 7am to 10am, or 10am to 1pm, or even 12pm to 3pm window.